Order be tracked
- high power, high efficiency, 5A, low ripple;
- (1) Use as a normal blood pressure modules with overcurrent protection capability;
- (2) as the various voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery) charger for solar panels, wind turbines and other occasions;
- (3) is used as a high-power LED constant current drive module;
- With constant pressure and constant current modes, there are light indicates which mode is currently in module;
- When used as a lithium battery charger, you can set the float voltage and the charge current size, there is light indicates is being charged or has been filled;
- Has the current limit protection, output short circuit even if it will not burn module.
- This module uses machine placement, reflow soldering, and each module shipments have been two hours before the aging tests to ensure high reliability.
- Input: IN + input positive, IN- input negative
- Output way: OUT + output positive, OUT- output negative
- Input voltage: 4-38V
- Output voltage: 1.25-36V continuously adjustable
- Output current: adjustable, maximum 5A
- Output Power: 75W maximum
- Working temperature: -40 to + 85 degrees
- Operating frequency: 180KHz
- Conversion efficiency: up to 96%
- Short circuit protection: Yes (limit current 8A)
- Overtemperature protection: (automatically shut off the output after overtemperature)
- Input reverse polarity protection: None, (if necessary, please enter the string into the high current diode)
- Installation: four 3mm screws
- Module dimensions: length 51mm width 26mm height 15mm
- Weight: 23g
- 1. Use as a normal blood pressure modules with overcurrent protection capability
- (1) constant pressure regulator potentiometer, the output voltage reaches the voltage value you want
- (2) 10A current with a multimeter measuring the output short circuit current file (directly to the two leads to the output can), while adjusting the constant current potentiometer allows the output current reaches a predetermined value of overcurrent protection. (Such as the current value of the multimeter displays 4A, then you can use the module to the maximum current 4A, 4A current to constant voltage constant current when the red light is on, otherwise the light off)
- Note: When used in this state, since the output of 0.05 ohm current sense resistor, there will be 0 ~ 0.3V voltage drop after connected to the load, this is normal! This drop is not being pulled down your load, but down-sampling resistor.
- 2. Use as a battery charger
- Module without constant function can not be used to charge the battery, since the end of the battery and charger power consumption big difference between charging current is too large, resulting in damage to the battery, so when you want to start the battery using a constant current charging, when charging to a certain extent automatically switches back to constant voltage charging.
- (1) Make sure you need to recharge battery float voltage and charging current; (if lithium argument is 3.7V / 2200mAh, then float voltage is 4.2V, the maximum charging current 1C, namely 2200mA)
- (2) under no-load conditions, the multimeter to measure the output voltage of the constant voltage potentiometer to adjust the output voltage reaches the float voltage; (if rechargeable lithium battery to 3.7V, the output voltage can be adjusted to 4.2V)
- (3) 10A current with a multimeter measuring the output short circuit current file (directly to the two leads to the output can), while adjusting the constant current potentiometer allows the output current reaches a predetermined charge current value;
- (4) Charging turn lamp current default factory setting is 0.1 times the charging current; (the battery during charging current is gradually reduced, gradually converted to constant voltage charging by the constant current charging, if the charging current setting is 1A, then when Charge current is less than 0.1A when the blue light off, green light is on, then the battery is fully charged)
- (5) connected to the battery charge.
- (1,2,3,4 step is: input termination power, output unloaded battery is not connected)
- 3. Use a high-power LED constant current driver module
- (1) determine the work you need to drive the LED current and the maximum operating voltage;
- (2) No-load condition, the multimeter to measure the output voltage of the constant voltage potentiometer to adjust the output voltage reaches the LED maximum working voltage;
- (3) 10A current with a multimeter measuring the output short-circuit current gear while adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
- (4) connected to the LED, the test machine.
- (Steps 1 through 3 are: input connected to the power supply, the output load is not connected LED.)
- 5A Constant Current LED Driver Module: 1pcs
Can you ship order to my home?
Generally speaking, we can ship the orders ot almost the coutries in the world, excluding some countries. You can choose your country when you order.
Which type of shipping way and how about the delivery time?
We mainly provide the two types of shipping methods. When you order from the smaring.com, you can choose your preferred shipping method on the Order Information page during the checkout process. The smaring.com offers the following TWO different international shipping methods.
Estimated Delivery Time
China Post,HongKong Post, Singapore Post,etc.
DHL, FeDex, UPS, EMS, etc.
How to get free shipping ways?
If the total price of all orders in one time is over Some Value (like $10, or $50, which can be seen at the head of each page), and the total weight is less than 2kg, then, your order would be FREE shipped by Registered Post all over the world.
Can I track my order?
All orders can be tracked in the site: http://www.17track.net. Open this site, and fill in the tracking number, like RS387577781CN (NOT order number), Then you can see the shipping information.
- The shipping time mentioned above refers to the estimated time of business days that the shipment will take after an order has been shipped.
- Business days do not include Saturday/Sunday and any public holidays.
- These estimations are based on normal circumstances and are not a guarantee of delivery times.
- We are not responsible for the failures or delays in delivery resulting from any force mature event, such as natural disaster, bad weather, war, customs issues, and any other event beyond our direct control.
What Shipping Methods are Available?
- In general, it is the China Registered Post.
- If you choose express, you can choose DHL, FeDex, EMS, or others.
- If your order value is over some value regulated by this shop, and the weight is lower than 2kg, then you can choose the Free shipping way by the China Registered Post.
How Long Will it Take To Get My Package?
To some extent, it is decided by the shipping company. We will send your order as soon as possible. But, after shipped, we cannot control the shipping speed.
How Do I Track My Order?
Certainly you can track it by the site: https://www.17track.net/en
Do I Need An Account To Place Order?
To better track your order, and contact you if something happens, you need register an account to place the order.
You can contact us by mail: email@example.com for any problem.
When we send the order, you cannot change or cancel the order. So, if you want to change the order, please do it before send.
Since the shipping fee is very very high, if the items have no any quality problem, we don't generally accept the return. So please think it over carefully before you order.